Lexmark XM1140 User Manual page 171

Understanding the printer menus
Use
Use Multi‑Page TIFF
On
Off
Transmission Log
Print log
Do not print log
Print only for error
Log Paper Source
Tray [x]
Manual Feeder
FTP bit Depth
1 bit
8 bit
File Name
Custom Job Scanning
On
Off
Scan Preview
On
Off
Allow Save as Shortcut
On
Off
Background Removal
‑4 to 4
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
To
Provide a choice between single-page TIFF files and multiple‑page TIFF files. For a
multiple-page scan‑to‑FTP job, either one TIFF file is created containing all the pages,
or multiple TIFF files are created with one file for each page of the job.
Notes:
•
On is the factory default setting.
•
This menu item applies to all scan functions.
Specify whether the transmission log prints.
Note: "Print log" is the factory default setting.
Specify a paper source when printing FTP logs.
Note: Tray 1 is the factory default setting.
Enable the Text/Photo mode to have smaller file sizes by using 1‑bit images.
Note: 8 bit is the factory default setting.
Type a base file name.
Note: You can enter up to 53 characters.
Copy a document that contains mixed paper sizes into a single scan job.
Note: Off is the factory default setting.
Specify whether a preview will appear on the display for scan jobs.
Notes:
• Off is the factory default setting.
•
This menu item appears only when a formatted, working printer hard disk is
installed.
Enable shortcut creation for FTP addresses.
Note: On is the factory default setting.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Specify the contrast of the output.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
171