Placing Separator Sheets Between Copies; Copying Multiple Pages Onto A Single Sheet - Lexmark XM1140 User Manual

Copying

Placing separator sheets between copies

1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Separator Sheets
Note: Set Collate to "1,2,3 ‑ 1,2,3" to place separator sheets between copies. If Collate is set to "1,1,1 ‑ 2,2,2,"
then the separator sheets are added to the end of the copy job. For more information, see "Collating copies" on
page 77.
4
Select one of the following:
•
Between Copies
•
Between Jobs
•
Between Pages
• Off
5
Touch > Copy It.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single
sheet of paper.
Notes:
•
Make sure to set the paper size to letter, legal, A4, or JIS B5.
•
Make sure to set the copy size to 100%.
1
Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Paper Saver > select the output you want >
Note: If Paper Saver is set to Off, then the Print Page Borders option is unavailable.
> Copy It
78