Honeywell VideoBloX User Manual page 94

SYSTEM CONFIGURATION
Priority
Set Password
Expiry Date
LOGIN SEQUENCE
Enabled
Sequence
Sequence Number
Edit
LOGOUT SEQUENCE
Enabled
Sequence
Sequence Number
Edit
AUTO LOGOUT
Enabled
Auto Logout
PTZ CONTROL TIMEOUT
Enabled
Timeout
Steps for Configuring User Details
1. On the Users screen, select the Detail tab on the right side of the window.
2. Select the User Number to be configured.
78
This feature is not available - the only language available is
English.
The priority assigned to this user. Priority can be set to a
number between 0 and 255 with 0 being the highest priority.
Use this button to set a password (up to 8 characters).
Expiration date for this user's password.
When enabled, allows for a sequence to be run when the user
logs in.
Drop-down box used to select (by name) the sequence to run
when this user logs in. The sequence name correlates with
the sequence number.
Drop down box used to select (by number) the sequence to
run when someone logs in at this keyboard. Sequence
number correlates with sequence name.
Used to edit the selected sequence.
When enabled, triggers a sequence to run when the user logs
in.
Drop down box used to select (by name) the sequence to run
when the user logs in. Sequence name selected correlates
with sequence number.
Drop down box used to select (by number) the sequence to
run when someone logs in at this keyboard. Sequence
number correlates with sequence name.
Used to edit the selected sequence.
When enabled, sets up automatic logout of this user after a
period of inactivity.
Used to set the period of inactivity (in minutes) after which this
user will be logged out.
When enabled, sets a timeout for PTZ control after a period of
inactivity for this user.
Used to set the period of inactivity (in seconds) after which
PTZ control will be lost for this user.