SYSTEM CONFIGURATION
Figure 3-63 the Display textbox
2. Click on the button you would like to configure on the software's interface, see
Figure 3-64 Clicking on the button to be configured
3. Enter the text to be displayed on the keyboard when
4. Enter the command format in the Device Control textbox, see
Figure 3-65 Key Press Configuration
5. Click on the
If Key Press Device Control is selected from the drop down list in step 1, the interface
would look like after all the steps have been performed.
124
3-64.
Display textbox, for example "Up", see
for detailed information about
.
Figure
3-65.
button to save the configuration.
Figure
key is pressed in the PCK
Figure
3-65. Refer to