Sequences Notes - Honeywell VideoBloX User Manual

6. Repeat steps 3-5 to continue entering commands for this sequence.
7. Click
8. When the sequence definition is complete, select
sequence to the flash memory.
9. Repeat step 2-6 to define additional sequences.
10. Select
Steps for Editing Sequences
1. On the Sequences screen, select the Editor tab on the right side of the window.
2. Select the Sequence Number to be defined/edited.
3. Modify the sequence steps using the record navigation keys and editing parameter
values as needed.
4. To add/change Commands, click in the Command cell and use the drop-down box to
select an available command.
5. To remove a command line, place the cursor in the command field and click
6. Repeat steps 3-5 to continue editing commands for this sequence.
7. Select

Sequences Notes

The Sequences Notes tab is used to enter any notes applicable to the Sequence.
It is helpful to define the sequence in text form; doing so enhances the understanding of
the Sequence.
to remove a record from the sequence.
to save/download all information from the current page.
to save/download all information from the current page.
Honeywell
to save the
.
109