Figure 3-36 High Speed Dome Mode; Figure 3-37 Ptz Mode - Honeywell VideoBloX User Manual

-
-
-
High Speed Dome (PTZ) Mode
The PTZ control functionality is only available in Camera Mode or Group Mode.

Figure 3-36 High Speed Dome Mode

•
-
-
-
-
•
-

Figure 3-37 PTZ Mode

•
-
-
-
Select the required monitor using the numeric keys, followed by Enter.
The Next / Prev keys will step through the next / previous monitors to which the
user / keyboard have access.
The ↑ / ↓ select the next / previous camera to the selected monitor.
Joystick
Twist to Zoom
18X Optical Zoom – twist joystick clockwise.
4x Digital Zoom – momentarily release joystick at end of Optical Zoom – then
twist clockwise.
Digital Zoom will cause some pixilation in the view.
Arrow Keys
Will 'nudge' the camera to provide accurate positioning.
Auto focus – Special Feature
The dome will stay in auto-focus until stationary.
It will switch out of auto-focus after a preset time.
It will switch back into auto focus after it is moved 10 degrees.
Honeywell
97