Figure 3-32 Login Mode; Figure 3-33 Camera Mode - Honeywell VideoBloX User Manual

Login Mode

Figure 3-32 Login Mode

•
-
-
-
-
-
-
•
Camera Mode

Figure 3-33 Camera Mode

•
-
-
-
-
The Login / Logout key is illuminated.
Enter the user ID on the numeric keypad, and then press Enter.
Enter the password on the numeric keypad, and then press Enter.
Correct mistakes using the Clear Key or key '<-'.
The system will default to Camera mode.
The system can limit which users are allowed to log in at which keyboards.
The keyboard functionality is determined by the access that is defined for the
keyboard AND the access that is set for the operator.
It is not necessary to log out.
Switch a camera to the currently selected monitor
Enter the camera number on the numeric keypad then press Enter.
Correct mistakes using the ← and Clear keys.
The Next and Prev keys step through sequential camera numbers.
(Cameras with no video or no access will be "skipped".)
Alternate view (If programmed)
Honeywell
95