Keyboard Notes - Honeywell VideoBloX User Manual

KEYBOARD
ACCESS (ROW)
Steps for Configuring Keyboard Access
1. From the Keyboards screen, select the Access tab. Choose from the sub-levels
available: Cameras, Monitors, Keyboards, Sequences, Functions, or Devices.
2. Set access for each keyboard using the following methods:
• Click on Access button to include this keyboard in / exclude this keyboard from
• Click on a Group column or on an individual cell (in the Access row) on the table
Keyboards can be in more than one group at a time.
3. Select
4. Repeat steps 1-3 as needed to configure keyboard access in any of the remaining
sub-levels.
5. Users should log out then log back in to see keyboard configuration changes.

Keyboard Notes

The Keyboards Notes tab is used to enter any notes applicable to the keyboard.
Suggested entries: model number, serial number, physical location and classification
(security/surveillance).
Indicates the groups in which the keyboard is included /
excluded. (Groups shown depend on sub-level selected.)
ALL groups. (Include =
toggle between include/exclude settings.
to include this keyboard in / exclude this keyboard from the particular group.
(Include = / Exclude =
include/exclude settings.
to save/download all information from the current page.
/ Exclude = ). Click on the Access button again to
). Click on the Group again to toggle between
Honeywell
91