Output Access - Honeywell VideoBloX User Manual

OUTPUT NOTES
LOCATION
Enable
X pos
Y pos
Steps for Configuring Video Output Detail
1. On the Outputs screen, select the Detail tab on the right side of the window.
2. Select the Output Number to be used for this output.
3. Enter the Physical O/P address of the output connection.
4. Select Monitor for the Output. Other options are intended for future releases of the
Matrix Switcher.
5. Enter/edit the Output Name. Include the output number in the name entered as it
does not appear on its own in displays or reports.
6. Enter/edit a Short Name for the output.
7. If audio is associated with this output, check the box to Enable audio and
enter the physical address of the audio output.
8. Enter Notes about this output in this free-form field. It is helpful to include the output
location in this field.
9. Select

Output Access

The Outputs Access tab is used to set permissions for all video outputs.
Free-form field.
i.e., "17-in Monitor – Top Left in Surveillance Bay 2"
Enable output title.
X position of the output title
Y position of the output title
to save/download all information from the current page.
Honeywell
61