Outputs (Adding A Video Output); Outputs Detail - Honeywell VideoBloX User Manual

An example of satellite addresses setting.
Here are 2 sub-VBs and one Main VB. The Main VB is an original VB. The two sub-VBs
are connected to each other via Ethernet. One of the two sub-VBs (called VB1) is
connected to the Main VB.
The Link setting of Main VB is described in the following table. Its IP is 192.168.1.11.
Address
1
2
3
The Link setting of sub-VB whose IP is 192.168.1.12 is described in the following table.
Address
1
2
3

OUTPUTS (Adding a video output)

Outputs Detail

The fields necessary to add a video output are on the Outputs tab.
The Outputs Detail tab is used to enter all physical characteristics for a video output.
Type
Ethernet 192.168.1.11
Ethernet 192.168.1.12
Local NULL
Type
Ethernet 192.168.1.11
Ethernet 192.168.1.12
Ethernet 192.168.1.11
IP
Same with Main VB's IP. the Main
VB's satellite address is 1.
Address 2 is a Net VideoBloX.
Address 3 is an original VB. Connect
Main VB via Com2.
IP
Address 1 is a Net VideoBloX.
Same with Sub VB's IP, so the
Sub VB's satellite address is 2.
Although this VB is an original VB,
but it connect to Main VB, so
when Sub VB wants to control this
VB, the Sub VB still needs to
send commands to Main VB, and
then Main VB will transfer the
commands to the original VB.
Honeywell
Comment
Comment
59