Users Notes; Figure 3-25 Users - Notes Configuration - Honeywell VideoBloX User Manual

Hide thumbs Also See for VideoBloX:
Table of Contents

Advertisement

Steps for Configuring User Access
1. From the User screen, select the Access tab. Choose from the sub-levels available:
2. Set access for each user using the following methods:
3. Select
4. Repeat steps 1-3 as needed to configure user access in any of the remaining sub-
5. Users should log out then log back in to see user configuration changes.

Users Notes

The Users Notes tab is used to enter any notes applicable to the user.
Figure 3-25 Users – Notes Configuration
Heading
Cameras, Monitors, Keyboards, Sequences, Functions, or Devices.
• Click on the Access button to include this user in / exclude this user from ALL
groups. (Include =
between include/exclude settings.
• Click on a Group column or on an individual cell (in the Access row) on the table
to include this user in / exclude this user from the particular group. (Include =
Exclude =
).
Click on the Group again to toggle between include/exclude settings.
Users can be in more than one group at a time.
to save/download all information from the current page.
levels.
/
Exclude =
). Click on the Access button again to toggle
Honeywell
/
Notes tab
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents