NEC POWERMATE 8100 Series Service And Reference Manual page 71

3. Install the WebTelligent software on the web server using the NEC Select
Install CD.
Before installing NEC WebTelligent from the NEC Select
Install CD, refer to Appendix A, "Release Notes," for the
correct order in which to install the application.
T
Insert the NEC Select Install CD into the CD-ROM.
T
Click
Cancel
4. Click
on the taskbar, point to and click
Start
E:\NECUtil\WebTelig\Admin\setup.exe
where E: represents the CD-ROM drive.
5. Click
and follow the prompts to install the software.
OK
T
Follow the WWW Administration link, click the
edit the home page.
T
Modify the directory entry to
Files\PBNEC\WebTelligent\html
T
Scroll to the bottom of the page and set the default document to
login.html .
T
Click .
OK
6. Install the NEC Auto Discovery Agent software on a managed client.
Note:
Before installing the NEC Auto Discovery Agent
software on a client, check to see if it is already installed.
Look for the directory
C:\Program files\PBNEC\WebTelligent Discovery Agent.
If it is not there, install the software from the NEC Select
Install CD or download it from the NEC CSD website
(www.nec-computers.com).
7. Open and configure WebTelligent as follows.
Note:
LDCM 3.1 or later must be installed on every
client.
T
At a managed desktop computer, start a web browser.
! CAUTION
in the screen.
C:\Program
and click
, and type
Run
tab, and
Directories
.
OK
System Configuration 2-39