NEC POWERMATE 8100 Series Service And Reference Manual page 268

IDE and diskette drive pin assignments,
5-18
IDE connectors, 5-18
installation, 3-30
ISA connector, 5-21
modem in connector, 5-4
NLX connector, 5-6, 5-9, 5-12
PCI connectors, 5-20
PCI/ISA connector pin assignments, 5-20
power supply connectors, 5-22
removal, 3-30
specifications, 10-4
subsystem connector pin assignments, 5-3
Wake-On LAN connector, 5-4
RJ-45 connector, 1-6
S
Safety
general rules, 3-2
SCSI
controller, 1-4
drives, 1-2
SCSI adapter board, 1-14
SCSI hard drives
jumper settings, 2-7
SCSI Select utility, 2-26
Secondary cache, 10-3
Secondary IDE port, 2-15
Security
chassis intrusion notification, 1-8
features, 1-8
locking tab, 1-9
menu, 2-19
NEC Security, 1-8
password clear, 4-6
password protection, 1-8
security slot, 1-9
unattended start, 2-20
Windows, 1-8
Security menu (BIOS Setup), 2-19
Select Install CD, 2-41
Serial interface
connector, 1-6, 4-23
pin assignments, 4-23
Serial port
addresses, 2-4, 2-13, 2-14, 4-16
interrupts, 2-4, 2-13, 2-14, 4-16
Setup (BIOS), 2-10
Slave IDE device
primary, 2-15
secondary, 2-15
SMC FDC37C777, 1-10
SMC FDC37C777 chipset, 4-10, 4-12
SNMP Agent, 2-32
Sockets
DIMM, 4-8
processor, 4-8, 4-12
Sound board specifications, 10-10
Sound system specifications, 10-10
Speakers
problems, 8-6
set, 1-13
Specifications
AccelGRAPHICS AccelSTAR II graphics
board, 10-9
ATI 3D Charger AGP board, 10-8
ATI Xpert@Work AGP board, 10-8
compliance, 10-14
diskette drive, 10-6
environmental and safety, 10-14
keyboard, 10-5
mouse, 10-4
PC adapter device, 10-12
power supply, 10-7
riser board, 10-4
sound board, 10-10
sound system, 10-10
system, 10-2
system board, 10-3
system unit, 10-5
tape backup unit, 10-13
Zip drive, 10-11
Speed
DIMMs, 4-8
processor, 4-12, 4-13
Suspend button, 1-4
Swap box, 1-15
Switch board/IR assembly
installation, 3-10
removal, 3-10
System
cleaning, 7-2
maintenance, 7-2
System board, 1-3, 1-10
aligning, 3-27, 3-28
connectors, 4-2
installation, 3-27
jumper settings, 2-4, 2-5
latch, 3-26
latching, 3-29
NLX form factor, 1-10
removal, 3-26
specifications, 10-3
System board plastic rail
installation, 3-29
removal, 3-29
Index-7