Installing Unit In A Hp Rack; Installation Of Rails - NEC S2500 User Manual

2. Installing Unit on HP Rack
NOTE: There are old and new types of HP racks. To install the
unit on the HP rack of the new type, the NF9100-SK01E
rack-mount kit is to be purchased separately. Ask your sales
representative for details.

2.1 Installation of Rails

The procedure explained in this section covers the rail installed to the left side of the rack, when
viewed from the front of it. The same procedure is applied to the right rail.
1. Slightly loosen the four flush screws at the rear of the rail.
D-18
Flat head screw