Table of Contents
Advertisement
•
Do not install the disk array unit and the host systems in an unsafe or unstable
manner. If so, damage may occur to the unit and/or you may be personally injured.
•
Do not install the disk array unit and the power cords in an area with direct sunshine
or near any apparatus generating heat such as a heater. If so, a fault may occur.
Further, the insulating coating of the power cord may be melted causing fire or
electric shock to occur.
•
Insert the plug of a power cord to an AC outlet securely. Tightly secure the DC
power cable with the screw. Any power cord shall be routed with sufficient margin to
avoid excess strain from being applied to the plugs of the power cord or the power
cord itself. If a power cord is removed from the AC outlet during operation, data may
be lost and/or a fault may occur.
•
To prevent electric shocks, connect all power cords to an AC outlet with earth
grounding. Connection of the earth line to a gas pipe is extremely dangerous. Never
do it.
•
Before connecting or removing a peripheral device from the disk array unit, turn off
all the power switches of the disk array unit and peripherals and pull out the power
cords from the AC outlets or distribution board. If not, some units may be damaged
and/or you may be electrically shocked.
•
To carry or reinstall the disk array unit, disconnect all cables and power cords
beforehand. If not, some units may be damaged, you may be electrically shocked,
and/or a fire may occur.
•
Handle optical fibers carefully and gently.
•
The minimum bending radius of optical fiber shall be 30 mm.
•
Dust and/or dirt may attenuate the optical power of optical fiber to cause data errors
to occur. Clean any optical fiber cable whenever it is inserted into the mating
connector with the following procedure. Never clean a connector in which light is
present in the fiber.
1. Use a lint-free "wipe" that has been dipped into alcohol (use of 99% reagent-
grade alcohol is recommended).
2. Followed immediately by a dry lint-free wipe.
3. And finally to blow-dry using a can of clean, compressed air
CAUTION
v
Advertisement
Table of Contents
