Table of Contents
Advertisement
Environmental Considerations for the Use of Disk Array Unit
During installation of the disk array unit, take into account the following considerations on the
location, room temperature, space required for handling, ventilation, and other conditions.
•
Install the disk array unit indoors.
Do not expose the disk array unit to direct sunlight. Use a window shade or
curtain to block sunlight on the unit if necessary.
•
Install the disk array unit on a level surface of sufficient strength. In addition, do
not apply shocks and/or vibrations to the disk array unit. If so, some
components may be damaged causing the disk array unit to become defective
and/or personal injury.
•
Install the disk array unit in an area under the following conditions; temperature
range between 5°C - 40°C and a humidity range between 10% - 80% (without
condensation).
•
Do not install the disk array in an area with running water or oils, areas
contaminated by liquids such as water and oil, steam, areas with steam or
other high moisture content. If so, a fault or electrical shock may occur
•
Do not install the disk array in an area near the emission of chemical steam or
an area where the disk array may come in contact with an inflammable
substance. If so, a fault, fire, or explosion may occur.
•
Do not install the disk array unit in dirty or dusty environments. If so, a fault
may occur.
•
Do not install the disk array unit in an area with direct sunshine or near fire or
an apparatus generating heat such as stove. If so, a fault or deformation may
occur.
•
Do not install the disk array unit near TV, radio, or cordless telephones as
some interference may appear in the TV, radio, or cordless telephone.
•
Do not use cellular phones near the disk array unit. If so, a fault may occur.
•
Do not install the disk array unit near any device generating a strong magnetic
field, such as audio speakers. If so, a fault may occur.
•
Do not install the disk array unit so that the ventilating holes on the front and
rear faces are blocked. If so, heat generation and/or fault may occur.
xx
Advertisement
Table of Contents
