Appendix D Installing Unit On Rack; Installing Unit On New Universal Rack Mount Kit - NEC S2500 User Manual

Appendix D Installing Unit in a Rack
1. Installing the Rack-mount Kit (Accessory) in
an NEC Storage Rack
NOTE: NEC Storage rack indicates one of the following:
NF9100-SY01E/SY02E/SY01BE/SY02BE (24U-rack)
NF9100-SY04E/SY05E/SY04BE/SY05BE (36-U rack)
NF9100-SY06E/SY07E/SY06BE/SY07BE (44U-rack)

1.1 Installing Unit on New Universal Rack Mount Kit

NOTE: The following procedures presume that a rail is
installed on the left part of a rack when the rack is viewed from
its front.
Install a rail on the right part of the rack in the same manner.
The left and right rails are different from each other. Use the
correct rail when installing it on the rack. (See the figure
below.)
For each rail, consider the face labeled 'Inner' as the rear (see
the figure below).
Front
Upper: Rail(R) Lower: Rail(L)
D-1
Inner
Rear