Table of Contents
Advertisement
2.3 Installation of Unit
1. Using the same procedure explained above, install the right rail.
2. Lift the unit and place the rear section on the rails, and push the unit toward the innermost of
the rack.
NOTE: The unit is very heavy. It is recommended that 3 people
assist in lifting and installing the unit. If less than three persons
are involved, personal injury may occur. Be careful not to
drop the unit while lifting.
3. Screw four set screws (M5 screws) in the unit at both sides to fix the unit.
This completes the installation of the unit.
D-23
Set screw
Advertisement
Table of Contents
