Table of Contents
Advertisement
3.2 Installation of Unit
1. Lift the unit, place the rear of the unit on the rails, and then push it in.
NOTE: The unit is very heavy. It is recommended that 3 people
assist in lifting and installing the unit. If less than three persons
are involved, personal injury may occur. Be careful not to
drop the unit while lifting.
2. At the front of the unit, firmly tighten the four set screws (2 at right and left each)
(#10-32UNF) to secure the unit.
This completes the installation of the unit.
D-26
Set screw
Advertisement
Table of Contents
