imagistics fx2080 User Manual page 373

Message on the display
Memory full. Printing
will resume when mem.
is free. Press [OnLine]
to stop.
Memory overflow Rx
Memory overflow.
Memory overflow. Num-
ber of stored page: Store
these pages?
[Yes] [No]
Name is required
No command stored
No department codes
have been registered
No document stored
No Drum Cartridge
No Network Connection
No paper type set on
the PC
On XXXX
Please set paper (Letter
Plain)
To cancel select [Cancel]
No paper type set on
the PC
Please set paper (XXXX)
To cancel select [Cancel]
No polling document
No protect passcode
No report
No Toner Cartridge
Not enough memory
Not registered
Nothing has been
selected.
Nothing has been
stored.
There is not enough memory to store the print job. Wait until some reserved jobs are
finished and the memory becomes free.
Memory has overflowed during the fax reception.
Press [Stop] to return the standby screen.
You tried to enter more pages into memory than your machine could store.
You tried to store more pages into memory than your machine could store. Press [Yes] to
keep the scanned pages in memory, or press [No] to delete all pages stored during this
operation. The display shows how many pages are stored.
You need to enter a name for the registration.
You pressed [Fax Cancel/Job Confirm.] to review upcoming commands, but your
machine has no command stored.
To set the department management on, first register the department codes.
You tried to print a document from memory, but your machine has no documents in
storage.
The drum cartridge is missing or has not been properly installed in your machine.
Please properly install the drum cartridge."
The machine is not connected to the network. Check the network cable or the settings.
For more information, refer to the "Network Guide".
The cassette/tray selected for printing is empty. Please set the paper indicated in the
message and print your job, or press [Cancel] to cancel.
The paper selected for printing is not set to the machine. Please set the paper indicated
in the message and print your job, or press [Cancel] to cancel.
You tried to print out or delete a polling document when there is no polling document in
memory.
To protect the Department Management, Security reception or to mask the PIN, you
need to set the protect passcode in advance.
You requested an activity journal or transmit confirmation report, but your machine has
no record of any fax jobs occurring.
The toner cartridge is missing or has not been properly installed in your machine.
Please properly install the toner cartridge.
The machine cannot store documents into memory any more. Delete unnecessary docu-
ments stored or wait until a reserved job is done.
You pressed a key which is not programmed with any command.
– or –
You tried to delete a non-registered item. Non-registered items cannot be deleted.
You tried to press [Enter], when nothing has been selected. To change the settings or to
select destinations, first select items from the list, then press [Enter].
You tried to display the jobs in queue, when there is no job.
Description / Solution
m & t
aintenance roUBleShootinG
1
2
3
4
5
6
7
8
9
10
11
12
13
14
AI
14-19