imagistics fx2080 User Manual page 254

(2) Press [Right&Left] or [Top].
(3) Press [Enter].
7
Press [Enter] twice to return to the standby mode.
Press [Reset] to cancel the duplex copy settings.
8
Press [Start].
9
Press [Yes] while the document is being scanned.
Selecting [No] will cause one-sided document output.
10
After the document has been scanned, set the next document.
1 1
Press [Next Doc].
• The Next Doc setting can be deleted by pressing [Complete].
• To scan another document, press [Yes] while the document is being scanned.
7-24 c
opyinG