imagistics fx2080 User Manual page 249

One-sided copying of a duplex document (2:1)
This mode allows you to convert two-sided originals into one-sided documents.
1
Scan the front side.
To ADF
NOTE: When the power fails due to such as blackout during one-sided copying of
duplex document, see as follows:
• While sorting the scanned data:
The scanned data temporarily saved will not be saved in memory.
• When sorting the scanned data is completed:
The scanned data temporarily saved will be saved in memory.
1
Set the front side of the duplex document in the ADF.
2
Press [COPY] to display the Copy standby mode.
3
Press [Others], [DuplexCopy].
NOTE: You can assign [DuplexCopy] to the soft key. See "Soft keys" on pages 10-2 to
10-6.
4
Press [2 -> 1 sided].
• If you set an advanced functions proceed to step 5.
• If you do not set an advanced function, proceed to step 7.
5
Press [Advance].
2
Turn over the document
and scan the backside.
To ADF
3
The scanned data temporarily
saved in the memory will be
sorted and printed.
c
opyinG
1
2
3
4
5
6
7
8
9
10
11
12
13
AI
7-19