imagistics fx2080 User Manual page 252

(2) Press [Right&Left] or [Top].
(3) Press [Enter].
7
Press [Enter] twice to return to the standby mode.
Press [Reset] to cancel the duplex copy settings.
8
Press [Start].
Scan the front side of the duplex document.
9
When the following display is shown, set the document in the correct direction
and press [Start]. (See the table on page 7-17.)
• Press [Stop] to cancel.
• Be sure to set the document in the correct direction. (See the table on page
7-17.)
7-22 c
opyinG