Ambush Code - Alarm Lock NETWORXPANEL Programming Instructions Manual

Default Values are shown in parentheses.
Function Num-
ber(s)
43/44
52/53/54
60
61
64/65
66
67
69/70
Function Name
Clock Adjust
Pass Time
Set Keypad Lockout
Attempts
Set Keypad Lockout Time
Remote Input Momentary

Ambush Code

Add Relay/System Features
Enter Key
Programming
+/- 0-55
(0) (0) Seconds
(3 sec) 10 sec
1-9 Attempts
(6)
1-60 seconds
(1) (8)
(Enable) Disable
00-99
(9) (9) Ambush Code
Check all that apply:
1. Remote Input switch closed and Function 65 Remote Input
enabled
2. Remote Input switch closed and Function 64 Remote Input
disabled
3. Failed attempted entry
4. Disabled User or Group
5. Follow Access Granted
6. Scheduled Group 1 User Code
7. Scheduled Lock Event
8. Scheduled Unlock Event
9. Keypad Lockout
10. Ambush
11. First Key Press or Proximity Credential
12. Relay on Door Ajar
13. Create Two Door Mode
24. One Time Access for Group 3 Users
25. Disable Sounder
26. 5 sec. Delayed Entry
27. 15 sec. Delayed Entry
28. 45 sec. Delayed Entry
29. Toggle Passage Mode
30. Forced Unlock Follows Remote Input
31. Follow Access Granted--No Time Limit
32. Remote Input Disables Unit
34. Forced Lock Follows Remote Input
38. Emergency Commands Enable
39. User Lockout on Emergency
40. Door Ajar Monitor On (default is OFF)
41. Door Ajar Alert Sounder On (default is OFF)
Enable (Disable)
15 sec
29