EYPAD NTRY AND ROXIMITY ECURITY OCKS PDL5300 This double-sided stand-alone door lock provides controlled entry and exit at certain locations such as airport security areas and police stations. Features an HID com- ® patible ProxCard reader, and a real-time clock/calendar that automatically adjusts for Daylight Saving Time and allows for automated programming of events.
Therefore a person in possession of only the metal key on the Secondary Lock Side has no means of unlocking the PDL5300 lock. Only 5000 of the most recent events are transferred using the AL-DTM.
Corporation. AL-PCI Cable An ALARM LOCK AL-PCI cable is required to communicate between your computer’s RS-232 serial com- munications port (COM 1-4) and the AL-DTM or lock. One end of the AL-PCI cable is designed to be used on a 9-pin serial Com Port. If your computer has a 25-pin Com Port only, a 25-pin to 9-pin adapter must be used.
Software is "soft" -- flexible and changeable to your needs. Software exists inside your Alarm Lock™ series lock, and can be programmed (and re-programmed again and again) to suit your changing requirements. No more metal keys to distribute...instead, distribute User Codes -- and delete them from the lock software when needed.
2 = Supervisor, 1 = Print Only Users What is a User? For the PDL5300 series, the Master is abbreviated with an "M", and all other Levels are hierarchical, with higher levels A User is a person who is authorized to unlock, use or make being allowed to do anything the levels below them can do.
Page 7
DL-Windows is a computer program that allows you to pro- Users 3 through 11 can do. gram your ALARM LOCK T3 Security Lock. DL-Windows is not required to program your lock, but it makes programming much faster and easier. With DL-Windows, you can quickly...
Manager: Always associated with Users 4, 5, and 6. Can program all functions except functions relating to lock Lock Defaults for PDL5300 Users added will default to a Group Association and a Program Level Ability as follows: USER TYPE USER NUMBER...
Conventions Used in this Manual Enabling/Disabling Users (By User Number) Minimum Required Program Level User Number must be between 2 and 2000. Program Levels are abbreviated as follows: NOTE: Will Enable/Disable users even if the user is associated with an enabled Group. Function M = Master Description...
INSERTING CABLE INTO LOCK cable. IBM COMPATABLE PDL5300 LOCK (PRIMARY SIDE) LAPTOP OR DESKTOP PC Scenario 1 Create the program in DL-Windows on your computer, then transfer the program from the computer directly to the lock via an AL-PCI cable. You must always enter the User 298 User Code to send or receive data Using DL-Windows.
When a valid code is entered and the batteries are weak, Black: Ground the YELLOW LED will light and the sounder will sound for 4 seconds. PDL5300 Series locks use five (5) AA-size 1.5 Remote Release: volt alkaline batteries. Always replace weak batteries as Two white wires;...
Quick Start First Time Start Up 1. Unpack the lock. 2. With the batteries disconnected, hold down the ; key for 10 seconds and release. 3. Connect the batteries and listen for 3 beeps. Within 5 seconds of hearing the 3 beeps, press and hold ; until beeping starts.
Page 13
4. Press ; 2 ; 1 5 ; 7 4 5 2 :. In order for User 15 to open the Lock, a User Code must be entered and a ProxCard must be presented to the PDL5300 Lock. User may enter code or present card in either order to open the lock. The sounder will beep for up to 10 seconds, waiting for the User to enter their User Code and present their card.
Exit Program Mode Hold Down any key for 3 seconds. Program Mode exit is confirmed by several beeps. You are now in normal operation. Re-enter Program Mode If you wish to re-enter Program Mode, key-in your new 6-digit Master Code, and press ;. You are now ready to mount and install your PDL series lock and give out your User Codes.
Programming Functions--Overview Function 1 Change Master Code See page 16 Function 48 Enable Passage Mode See page 22 Function 49 Disable Passage Mode See page 22 Function 2 Add/Delete/Change User Codes See page 16 See page 22 Function 50 Return Lock to Normal Passage Function 3 User Disable (By User Number) See page 17...
User Codes. See "Terminology Used in this Manual" on page 6 for more information. Lock Defaults for PDL5300 See page 8. Users added will default to a Group Association and a Program Level Ability as follows:...
Page 17
Programming Functions (cont'd) USERS (Continued) User Enable/Disable (By User Number) • User Number must be between 2 and 2000. NOTE: Will Enable/Disable Users even if the User is associated with an enabled Group. Use Feature 3 to disable a specific User Number and their associated User Code.
Page 18
Programming Functions (cont'd) CLEAR FUNCTIONS 12. Clear All Schedules and Timeout Functions ; 1 2 ; 0 0 0 : Function 12 clears all programmed Schedules and all Timeout Functions. (To clear All Timeout Functions only, see Function 13 below). Function 12 will clear all of the following: All Schedule Functions 72 through 93, Timeout Functions 5, 25 through 34 and Function 47.
Page 19
Programming Functions (cont'd) NOTE: Clear All Timeout Functions by entering Function 13. GROUPS Group Enable/Disable with Timeout (Enter Timeout, XXX Hours) (Functions 25-34 are enabled through the keypad only) • Hours must be between 1-999. Enter the functions below to Enable/Disable Groups for the amount of time entered in hours. NOTE: Only 4 Timeout Functions are allowed at any one time.
Page 20
Programming Functions (cont'd) CLOCK SETTINGS 38. Set Date [ _ _ _ _ _ _ ] ; 3 8 (Date) • Use Month Day Year format - MMDDYY - Single digit months and days are entered with a preceding zero. •...
Page 21
Programming Functions (cont'd) CLOCK ADJUST Clock Adjust Number of seconds to adjust (speed up/slow down) the clock each day must be be- tween 0-55 seconds. Note: Repeated use of these Functions are not "cumulative" (this means, for example, if the clock has already been set to speed up 10 seconds per day, and then is found to Clock Accuracy need an additional 10 seconds, then program 20 seconds using Function 43).
Page 22
Programming Functions (cont'd) PERMANENT PASSAGE MODE Passage Mode Enable/Disable - Schedule will not Override • Function 48 allows passage through the door without the need for a User Code. Re-Lock using Function 49. • Programmed Schedules will not override the state of the lock using functions 48 and 49. If it is required that programmed schedules override Passage Mode, Enable/Disable Passage Mode using Functions 45/46.
Page 23
Infrared LED on Primary Lock Side Infrared Primary Lock Side Reader of the PDL5300 and the Printer (Side View) Place Infrared Reader (on printer) in front of the Infrared LED (on lock) Figure 2 Figure 1 55. Print Audit Trail ;...
Page 24
Programming Functions (cont'd) 59. Reserved LOCKOUT 60. Number of Attempts Before Lockout [ _ ] ; 6 0 (Number of Attempts) • Number of attempts before lockout must be 1-9 attempts. • The number of attempts is reduced by half every time the keypad is locked out without a successful code entry (default is 6 attempts).
Programming Functions (cont'd) SYSTEM FEATURES [ _ _ ] ; 6 7 67. Add System Features (Event Number) • Remote Input Functions • PC Communication Functions 33. Remote Input Puts Unit in PC Communication Mode 29. Toggle Passage Mode. Remote Input toggles Passage Mode.
Programming Functions (cont'd) ENTER KEY Enter Key • When this function is enabled, the User must press after any valid User Code entry. Therefore, this Function allows User Codes to be subsets of other User Codes. Examples: 1 2 3 : can be a valid user code; 1 2 3 4 : a valid user code within the same lock.
Page 27
Programming Functions (cont'd) QUICK SCHEDULES Quick Schedules - Enable Group For your convenience, your lock comes pre-programmed with Quick Schedules, which, when programmed, enable Groups for popular blocks of time. Group members will be enabled during the blocks of time defined below, but will still need to enter their User Codes into the keypad to unlock the lock.
Page 28
Programming Functions (cont'd) Scheduled Group 4 Enable (Group 1 Activated) Functions 92 and 93 allow you to set up a window of time where if any Group 1 User Code is entered within this window, Group 4 members will be enabled. (Group 4 members will still need to enter their User Codes to enter). For additional information, see Group 1 Activated Features on page 29.
The following examples detail the more advanced features of the PDL series locks. Although all features and device functions can be programmed using the lock keypad, when programming becomes more complex you may find it easier to use DL-Windows software to program your Alarm Lock security lock.
Page 30
Groups and Scheduled Group 1 Examples (cont'd.) Press ; 2 ; 4 ; 4 5 6 7 8 9 :. 3. Because User 4 does not have a default Group association, make User 4 a member of Group 1 using Function 35: Press ;...
Default Values are shown in parentheses. Function Function Name Programming Number(s) 43/44 Clock Adjust 0-55 Seconds 52/53/54 Pass Time (3 sec) 10 sec 15 sec Set Lockout Attempts 1-9 Attempts Set Lockout Time 1-60 seconds 64/65 Remote Input Momentary (Enable) Disable Add Relay/System Features Check all that apply...
User Number User Code Group User Name (1-2000) (3-6 digits) Association Note: For a complete list of User Codes, obtain a printout from either the remote printer (Program Function 56) or by using the DL-WINDOWS software.
Day(s) Up to 500 scheduled functions can be programmed (Up to only 150 using AL-DTM). For Day Enter : 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday Function Number Time Function Name 5 = Thursday, 6 = Friday, 7 = Saturday, 8 = Monday through Friday, 9 = Saturday and Sunday, 0 = All days of the week Enter time of day in 24-hour format (00:00- 23:59)
Glossary the User 297 User Code to regain access. ACCESS = Entry into a restricted area. • SUPERVISOR CODE = User Codes assigned to AUDIT TRAIL = A date/time stamped log of previous lock events. Users 7, 8 and 9. Can only program day-to-day operation.
Page 35
Glossary (cont'd) alarm panel during a predefined schedule. REMOTE INPUT = Entry into a restricted area, by Should the Group 1 enter the lock outside of the pressing a button connected to the REMOTE INPUT scheduled time, the alarm will not disarm. The WIRES (White and White) by someone on the other alarm panel must be armed through other means side of the door.
24 months In no event shall ALARM LOCK be liable for an amount following the date of manufacture. ALARM LOCK will, in excess of ALARM LOCK's original selling price of the...
Need help?
Do you have a question about the Trilogy Double-Sided PDL5300 and is the answer not in the manual?
Questions and answers