Connect The Machine To Network; Specify The Ip Address Settings; Automatic Setting; Check Ip Address Setting - Canon imageCLASS MF4350D User Manual

Connect the Machine to Network

To use the machine by connecting to the network, you must set up the IP address.
An IP (Internet Protocol) address is an identification number assigned to each individual computer connected to
the Internet.
To use the following functions, you must set up the IP address in advance.
Remote UI: Access and change the machine settings from browser on the computer by using the Remote UI software.
•
PC print: Print the documents from the computer.
•
PC fax: Fax the document on the computer.
•
Scan: Save scanned documents to the computer.
•
The following flow chart indicates the settings needed for each function.

Specify the IP Address Settings

Automatic Setting

By default, the IP address is assigned to the machine automatically by the DHCP server. Therefore, all you need to
do when using DHCP is just to connect the network cable. After connecting the LAN CABLE, wait for 30 seconds
until the machine gets the IP address.

Check IP Address Setting

To make sure this machine is communicating to the network properly, follow the procedure on p. 22.
–
It is recommended that the network administrator performs the procedure on p. 22.
–
Before performing the procedure on p. 22, make sure that the machine is turned on and connected to a network.
4 Set Up Network Connection (MF4370dn Only)
21