Throttle Lock - Husqvarna 36 Workshop Manual

Throttle lock

Dismantling
Saws 40, 45.
See continuation on next page.
Dismantle the throttle lock pin (A)
using a punch.
A
Saw 394
Turn the throttle lock as
shown in the figure, and lift
it out with the spring from
the cut-out in the handle.
52
– English
SAFETY EQUIPMENT
Other saws.
Saws 61, 268, 268K,
272XP, 272K, 272S,
281XP, 288XP and
394.
Saws 61, 268, 272XP, 272K,
272S, 281XP and 288XP.
Slide the throttle lock and
remove it forwards as
shown in the figure.
Continues on next page.
!
WARNING!
The fuel used in the chain saw
poses the following hazards:
1. The liquid and its vapours
are poisonous.
2. Can cause skin irritation.
3. Is highly inflammable.
Remove the tank unit from the engine
assembly. See page 103.
Saw 3120.
See continuation on next
page.
Saws 36, 41, 42, 55,
242XP, 246, 51,
254XP, 257 and
262XP.
Carefully prise up the lock
from the slot and remove.