Husqvarna 36 Workshop Manual page 43

All saws except 3120
Slide up the back edge of the
spring with a screwdriver.
Use a punch to knock out the pin holding the
knee link.
36, 41, 61, 268,
272, 281 and 288
Lift up the band's fixed end using a screw-
driver and remove the loose parts.
SAFETY EQUIPMENT
40, 42, 45, 51,
242, 246, 55, 254,
257, 262 and 394
3120
Carefully unscrew the vice so that the pres-
sure rod and the ratchet move out of the
clutch cover.
Dismantle the pressure rod from the brake
band.
Remove the screw that holds the fixed end of
the band.
Knock out the band's fixed end using a
punch through the hole in the clutch cover
and remove the loose parts.
43
English –