Husqvarna 36 Workshop Manual page 107

Assembly
Fitting the anti-vibration system's side absorber.
Fitting the anti-vibration system's damper element. Tightening torques, see the "Service data" for
respective saws.
Saw 394
Slide in the spring and its holder.
ANTI-VIBRATION SYSTEM
Saws 40, 45 and 3120
Fit the rubber stop with the help of a wire or
the like.
Other saws
Fit the rubber element using the tools
shown in the figure below.
Fit the spring element using an allen key as
shown in the figure below.
107
English –