Husqvarna 36 Workshop Manual page 53

Saws 61, 268, 268K, 272XP, 272K, 272S,
281XP, 288XP and 394.
Dismantle the throttle pin (B) by using a
punch.
B
Dismantle the throttle. On saw 394, also
remove the throttle cable.
Saws 40 and 45
Remove the three screws in the side of the
handle as well as the screw holding the
spring under the handle.
Lift out the throttle lock and the throttle.
SAFETY EQUIPMENT
Remove the springs where appropriate.
Saws 36, 41, 42, 55, 242XP, 246, 51, 254XP,
257 and 262XP.
Remove the rubber element (A). Slide out
the throttle pin (B) and lift out the throttle arm
and spring.
A
Saw 3120
Remove the three pins with a punch.
Press the throttle lock down and move
it and the trigger forwards until the
back edge of the lock appears.
Lift out the trigger lock.
Lift out the throttle with cable from
the front.
B A
53
English –