Configuring By Telephone - AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation

Configuring by Telephone

9.3 Configuring by Telephone
Restoring Factory Settings
All of the settings in the FRITZ!Box can be reset to their condi-
tion upon delivery by restoring the factory settings.
All settings you made in the FRITZ!Box—including the config-
ured Internet connection—are deleted when the factory set-
tings are restored.
Restoring Factory Settings
r991s159
01590s
After factory settings are restored, the FRITZ!Box is restarted.
Enabling and Disabling WLAN
The WLAN function can be switched on and off using the tele-
phone keypad. This is especially convenient when the WLAN
function has been switched off. Simply use your telephone to
turn it back on. This means that the WLAN function can be en-
abled without having use a wired connection to open the user
interface.
Enabling and Disabling WLAN
r96s1s
r96s0s
Do Not Disturb
For every analog extension of the FRITZ!Box, the Do Not Disturb
option can be enabled by telephone. When Do Not Disturb is
set, the telephone connected to the extension will not ring.
Enabling
You can choose between two different Do Not Disturb op-
tions.
If you enable Do Not Disturb immediately, it will remain en-
abled until you disable it:
Restores all settings in the FRITZ!Box to
their original condition on delivery.
Enables the WLAN function.
Disables the WLAN function.
60