Configuring The Internet Connection For Cable; Configuring The Internet Connection For The Mobile Telephone Network - AVM FRITZ!Box 7360 Installation, Configuration And Operation

Configuring the Internet Connection for Cable

5.
After the annex setting has been changed, the FRITZ!Box re-
starts automatically. The connection to the DSL network has
been established as soon as the "Power / DSL" LED stops
flashing and remains lit up.
6.3 Configuring the Internet Connection for Cable
With an additional cable modem you can also use your
FRITZ!Box 7360 on a cable connection. Then the Internet con-
nection is established and controlled by the FRITZ!Box itself,
so that in this operating mode, too, all FRITZ!Box functions
(like Internet telephony, firewall) are available without restric-
tion.
1.
2.
3.
6.4 Configuring the Internet Connection for the Mobile Telephone
Network
With a USB modem you can also establish the Internet con-
nection with your FRITZ!Box 7360 via the mobile telephone
network. A USB modem for mobile Internet access
(UMTS/HSPA) is required for this. The FRITZ!Box supports
UMTS/HSPA modems from various manufacturers.
The USB modem is already installed on the USB port of the
FRITZ!Box.
1.
2.
In the "Annex Settings" area, make sure that the annex
working on your DSL line is set. Save your settings by
clicking "Apply".
Open the FRITZ!Box user interface (see
Select "Wizards" in the menu.
Click the "Check Internet Connection" Wizard and follow
the instructions.
Open the FRITZ!Box user interface.
In the "Internet" menu, the sub-menu "Mobile Tele-
phone Network" is displayed.
36
page 31).