Wps (Wi-Fi Protected Setup) - AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation

WPS (Wi-Fi Protected Setup)

2.5 WPS (Wi-Fi Protected Setup)
The FRITZ!Box supports WPS (Wi-Fi Protected Setup). With
WPS you can create secure links between WLAN adapters and
your FRITZ!Box. All of the necessary WLAN security settings
are transferred in the process. You can use either the push-
button or the PIN method.
WPS can be used only in combination with WLAN adapters
that also support WPS. Consult the documentation of your
WLAN adapter to find out whether it supports WPS.
WPS with the Push-Button Method
The push-button method (WPS PBC) can be used if your WLAN
adapter is also equipped with a WPS button, or if WPS can be
enabled via the control software of the WLAN adapter.
1.
2.
The FRITZ!Box and the WLAN device now connect with each
other automatically. The WLAN device adopts the security set-
tings of the FRITZ!Box.
Press the "WLAN" button on the FRITZ!Box and hold it
down for at least six seconds.
As soon as the "WLAN" LED begins flashing, enable the
WPS function, either by pressing a WLAN button or in the
device's user interface (depending on the device). Acti-
vation must be started within two minutes.
119
Push for approx.
6 seconds