AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation page 72

Operation at the Telephone
Picking up a Call from the Answering Machine
Use this function to pick up incoming calls on your telephone
that already have been taken by the answering machine.
Picking up a Call
N
s09
P
Waiting Calls
When the "Call Waiting" feature is enabled and you are con-
ducting a call, you will be notified as soon as an external call
arrives on your your line. This call will be signaled by an
acoustic signal in the handset. You can accept the connection
with the new caller within 30 seconds. If you ignore the sig-
nal, the waiting call is rejected after 30 seconds.
For instructions on how to enable and disable the function,
see the section
Accepting or Rejecting Waiting Calls
R2
R1
R0
Pick up the handset.
Dial the sequence shown at left.
The call is now connected to your extension. You are
now connected to the caller.
on page 68.
To accept a waiting call, dial the sequence shown at
left. Your original call is now on hold.
To return to your original connection, dial the se-
quence shown at left.
You can also accept the waiting call by hanging up
your existing connection, i.e., by hanging up the
handset. In this case the telephone rings as soon as
you have hung up. Pick up the handset again to ac-
cept the waiting call.
To reject a waiting call, dial the sequence shown at
left.
72