AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation page 19

Connecting Computer(s) Wirelessly via WLAN
The security settings saved on the FRITZ!WLAN USB Stick are
applied to the computer. Now the FRITZ!Box and
FRITZ!WLAN USB Stick are connected with each other wireles-
sly.
For more information, see the manual on your AVM
FRITZ!WLAN USB Stick model.
Establishing a WLAN Connection Using WPS
If you are using a WLAN adapter from another manufacturer
and your WLAN adapter supports WPS (Wi-Fi Protected Set-
up), you can also use this mechanism to establish the WLAN
connection between your computer and the FRITZ!Box. For de-
tailed instructions about how to do so, see the section
(Wi-Fi Protected Setup) from page
Establishing a WLAN Connection Manually
Installing a WLAN Adapter
If you are using a WLAN adapter from another manufacturer,
you can also establish the WLAN connection manually. To do
so, proceed as follows:
1.
2.
3.
Establishing a Connection
The FRITZ!Box is delivered with preset values for WLAN securi-
ty. You must enter these values during the configuration of
the WLAN adapter.
If you would like to establish a WLAN connection using these
preset values, then your WLAN adapter must support the WPA
encryption procedure.
Switch on your computer.
Install the WLAN adapter in your computer along with
the appropriate software. Please take note of the in-
structions in the documentation of the adapter.
In order to establish a WLAN connection to the
FRITZ!Box, you can use the WLAN software for the WLAN
adapter, or the WLAN software supplied with the operat-
ing system.
19
119.
WPS