AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation page 73

Operation at the Telephone
Alternating Between Calls
Whenever you have one active connection and one caller on
hold, you can switch from one call to the other as often as you
want using the Hold button.
Alternating Between Calls
Call 1
P
R
M
Call 2
P
R2
Call 1
P
R2
Ending Hold
O
R1
O
K
Call
P
You are talking to caller 1.
Press the Hold button. Caller 1 is now on hold.
To establish a second call, simply dial ss plus the
desired extension number for an internal call, or the
desired external number.
If the partner you dialed picks up, you can conduct
a second telephone conversation. The original
caller is still on hold.
To switch back from caller 2 to caller 1, dial the se-
quence shown at left.
Caller 1 is now active again and caller 2 is on hold.
To switch back again from caller 2 to caller 1, dial
the same sequence. In this way you can alternate
between the two connections.
The caller on hold hangs up. You can continue talk-
ing on the active connection.
You end the active connection by dialing the se-
quence shown at left. The call that was on hold is
now active again, and there is no call left at hold.
You can also return to the call on hold by hanging
up the handset: this ends the currently active con-
nection. In this case the telephone rings as soon as
you hang up. Pick up the handset again to return to
the last call that was on hold.
73