AVM FRITZ!Box 6360 Cable Installation, Configuration And Operation page 55

FRITZ!Box USB Remote Connection
3.
4.
5.
6.
7.
8.
The result of the changed USB settings can be viewed in the
"Overview of Devices".
Disabling the USB Remote Connection
Perform the following steps to disable the USB remote con-
nection:
1.
2.
3.
4.
5.
6.
7.
The result of the changed USB settings can be viewed in the
"Overview of Devices".
Enable the expert settings of the FRITZ!Box in the "Sys-
tem / Expert Mode" menu. Confirm by clicking "Apply".
Open the "USB Remote Connection"page in the "Home
Network / USB Devices"menu.
Select the setting "USB remote connection enabled"
and click "Apply".
Now install the program for the USB remote connection
on the computer from which you want to use the USB de-
vices.
The next step is to specify for which kind of USB devices
the USB remote connection should be enabled. Enable
the desired options.
As a final step, click "Apply". All USB devices connected
to the FRITZ!Box will be detected again.
Open a web browser on the computer for which the USB
remote connection is to be disabled.
Enter fritz.box in the address line of the browser.
Enable the expert settings of the FRITZ!Box in the "Sys-
tem / Expert Mode" menu. Confirm by clicking "Apply".
Open the "Home Network / USB Devices" menu.
Select the "USB Remote Connection" page.
Disable all types of USB devices.
As a final step, click "Apply".
55