Microtek LightLid 35 Install Manual

A bonus accessory included with your microtek scanner

Download this manual

Installing and Getting Started

The LightLid 35 Plus is a bonus accessory included with your Microtek scanner,

providing you with the versatility to scan 35mm slides and filmstrips on your flatbed

scanner.

Microtek recommends the use of this accessory to scan slides for on-screen display

purposes or where high resolution is not critical. For high-quality print reproduction, we

recommend purchasing a dedicated slide scanner or a Microtek scanner with built-in

film-scanning features.

Please note: Scanning of color transparencies may vary, depending on the quality of

your film original.

A. Installing the LightLid 35 Plus

1. Unpack the LightLid 35 Plus.

2. Remove the scanner lid.

I49-003702 A, March 2004

3. Plug the connector (9-pin or 15-pin) of

the LightLid 35 Plus into the accessory

port at the back panel of your scanner.

Note: Make sure the scanner is powered

off before making the LightLid 35 Plus

connection.

9-pin connector

15-pin connector

Page 1 Installing and Getting Started The LightLid 35 Plus is a bonus accessory included with your Microtek scanner, providing you with the versatility to scan 35mm slides and filmstrips on your flatbed scanner. Microtek recommends the use of this accessory to scan slides for on-screen display purposes or where high resolution is not critical.
Page 2 A maximum of five frames in a filmstrip can be scanned at a time. 2. Place the LightLid 35 Plus vertically on the glass surface of the scanner, and center it along the top ruler of the scanner. Ensure that the calibration window...
Page 3 2. Click the Original button, and choose Positive Film or Negative Film, depending on the film you wish to scan. When selected, the light source of the LightLid 35 Plus lights up. 3. Click the Preview button to perform a preliminary view of the entire image.
Page 4 Note: For Mac OS X, select Positive or Negative from the Scan Material pull-down menu. When selected, the light source of the LightLid 35 Plus lights up. 3. Click the Overview button to perform a preliminary view of the entire image.

Lightlid 35plus