Microtek ScanMaker 9800XL Plus Start Here Manual page 7

Basic scanning for PC Users (cont.)
Scanning Positive or Negative Film
1. Select the film you wish to scan, then follow the procedures for
positioning transparent films detailed in the "Positioning
Transparencies" section of this Guide.
2. Launch ScanWizard Pro.
3. If scanning positive film such as 35mm slides:
a) Go to the Preview window of ScanWizard Pro and from the
Scan Material menu, choose Positive / Positive Film.
b) Follow steps 4 to 7 of the procedures detailed in "Scanning
Photos".
If scanning negatives:
a) Go to the Preview window of ScanWizard Pro and from the Scan Material menu, choose Negative /
Negative Film. The Negative Scan Settings window appears.
b) Go to the Negative Scan Settings window, choose the film brand, film type, and ISO settings that
match the film you use. For more details, refer to a PDF document called "ScanWizard Pro
Reference Manual" in your Microtek software CD/DVD and see the Addendum to ScanWizard Pro
section.
c) Follow steps 4 to 7 of the procedures detailed in "Scanning Photos".
4. Click the Scan (or "Batch") button in the Preview window or on the scanner unit to start scanning.
Settings window
Preview window
7
Smart-Touch button (Scan)
Negative Scan Settings
window