Yamaha WR426F(N) Owner's Service Manual page 498

KICK AXLE AND SHIFT SHAFT
3. Install:
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
4. Install:
NOTE:
Apply the engine oil on the kick axle.
Slide the kick axle assembly into the crank-
case, make sure the kick axle stopper a fit
into their home position 3.
5. Hook:
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
Kick idle gear
1. Install:
NOTE:
Install the kick idle gear with its depressed
side a toward you.
Apply the engine oil on the kick idle gear
inner circumference.
4 - 82
Spring guide 1
Kick axle assembly 1
Plain washer 2
Torsion spring 1
Kick idle gear 1
Plain washer 2
Circlip 3
New
ENG