Fspf Min-Ls-Arrival - HP 6125XLG Command Reference Manual

Default
The default setting is 20 seconds.
Views
VFC interface view
Predefined user roles
network-admin
Parameters
value: Specifies the Hello interval of the interface, in the range of 1 to 65534 seconds.
vsan vsan-id: Specifies the VSAN to which the interface belongs, in the range of 1 to 3839.
Usage guidelines
The Hello interval specifies the time between the Hello packets sent periodically by the switch to discover
and maintain neighbor relationships.
The configured Hello interval must be smaller than the dead interval and must be the same at the two
ends of the link.
Examples
# Configure the Hello interval for interface VFC 1 in VSAN 4 as 10 seconds.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fspf hello-interval 10 vsan 4
Related commands
fspf dead-interval

fspf min-ls-arrival

Use fspf min-ls-arrival to configure the minimum LSR receiving interval for a specified VSAN.
Use undo fspf min-ls-arrival to restore the default.
Syntax
fspf min-ls-arrival value
undo fspf min-ls-arrival
Default
The default setting is 1 second.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Minimum LSR receiving interval in the range of 0 to 60 seconds.
55