HP 6125XLG Command Reference Manual page 90

address FFFCxx of the switch, where xx is the domain ID of the destination switch. For example, if the
domain ID of the destination switch is 3, its domain controller address is FFFC03.
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
To abort the FC ping operation during the execution of the command, press Ctrl+C.
Examples
# Check whether the device with destination address FFFC02 in VSAN 1 is reachable.
<Sysname> fcping fcid fffc02 vsan 1
FCPING fcid 0xfffc02: 128 data bytes, press CTRL_C to break.
Reply from 0xfffc02: bytes = 128 time = 1.281 ms
Reply from 0xfffc02: bytes = 128 time = 0.890 ms
Reply from 0xfffc02: bytes = 128 time = 0.889 ms
Reply from 0xfffc02: bytes = 128 time = 0.892 ms
Reply from 0xfffc02: bytes = 128 time = 0.894 ms
--- 0xfffc02 fcping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 0.889/0.969/1.281 ms
# FC ping packets fail to be delivered.
<Sysname> fcping fcid fffc01 vsan 1
FCPING fcid 0xfffc01: 128 data bytes, press CTRL_C to break.
fcping: sendto: No route to host
fcping: sendto: No route to host
fcping: sendto: ^C
--- 0xfffc01 fcping statistics ---
3 packet(s) transmitted
0 packet(s) received
100.00% packet loss
Table 27 Command output
Field
FCPING fcid 0xfffc02
128 data bytes
press CTRL_C to break
Reply from 0xfffc02: bytes = 128 time = 0.892
ms
Request time out
fcping: sendto: No route to host
Description
Check whether the device with destination address FFFC02
is reachable.
Number of data bytes in each echo request.
During the execution of the command, press Ctrl+C to abort
the FC ping operation.
Received the echo reply from the device whose destination
address is 0xfffc02.
•
bytes—Number of data bytes in the echo reply.
•
time—Response time.
No echo reply was received within the timeout period.
Echo request failed to be delivered.
85