Display Fc Scr-Table - HP 6125XLG Command Reference Manual

Hard-addr: 0x000000
--- Total 2 entries ---
Table 9 Command output
Field
FCID
Type
Port-WWN(vendor)
Node-WWN
Class
Node-IP-addr
FC4-types(FC4 features)
Symbolic-port-name
Symbolic-node-name
Port-type
Fabric-port-WWN
Hard-addr
Total entries

display fc scr-table

Use display fc scr-table to display the State Change Registration (SCR) list of N_Ports.
Syntax
display fc scr-table [ vsan vsan-id ]
Description
FC address of the N_Port.
Port type registered by the node with the switch:
•
0x00(Unidentified)—No port type is registered.
•
0x01(N)—N_Port, which directly connects to the fabric.
•
0x02(NL)—NL_Port, which connects to the fabric through an
arbitrated loop.
•
0x03(F/NL)—F_Port or NL_Port.
•
0x7f(Nx)—N_Port, NL_Port, or F_Port or NL_Port.
•
0x81(F)—F_Port, which connects to an N_Port.
•
0x82(FL)—FL_Port, which connects to an NL_Port.
•
0x84(E)—E_Port, which connects to an E_Port or B_Port.
•
0x85(B)—B_Port. The ports on a bridge that connect two E_Ports
are called B_Ports.
•
0xXX(Unknown)—Port types other than the preceding ones.
NOTE:
Only N_Ports and NL_Ports will be registered by a node.
WWN of the N_Port (name of vendor).
WWN of the node.
Class of service.
IP address of the node.
FC4 type (feature) entries:
•
FC4 type—Includes SCSI-FCP, LLC/SNAP, SW_ILS, SNMP, GS3,
VI, and NPV.
•
Feature—Includes supporting Initiator, Target, or Initiator/Target.
Symbolic name, which is used for describing the N_Port.
Symbolic name, which is used for describing the node.
Link type of the N_Port, which can be N representing point-to-point.
WWN of the F_Port.
Hardware address of the N_Port.
Number of entries in the VSAN.
22