Timer Resource-Allocation - HP 6125XLG Command Reference Manual

If you configure the error detection timeout period globally and for the specified VSAN at the same
•
time, the configuration for the VSAN is given priority.
Examples
# Set the error detection timeout period to 6000 milliseconds for VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] timer error-detect 6000
Related commands
fc timer error-detect

timer resource-allocation

Use timer resource-allocation to specify the resource allocation timeout period for a specified VSAN.
Use undo timer resource-allocation to restore the default.
Syntax
timer resource-allocation value
undo timer resource-allocation
Default
The resource allocation timeout period is 10000 milliseconds.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Resource allocation timeout period in the range of 5000 to 10000 milliseconds.
Usage guidelines
The resource allocation timeout period can be configured in system view or VSAN view:
The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
•
view takes effect only on the current VSAN.
• If you configure the resource allocation timeout period globally and for the specified VSAN at the
same time, the configuration for the VSAN is given priority.
Examples
# Set the resource allocation timeout period to 6000 milliseconds for VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] timer resource-allocation 6000
Related commands
fc timer resource-allocation
35