Vsan - HP 6125XLG Command Reference Manual

Parameters
vsan-id-list: Specifies a list of VSANs, in the format of vsan-id-list = { vsan-id1 [ to vsan-id2 ] }&<1- 1 0>,
where vsan-id is in the range of 1 to 3839 and &<1- 1 0> indicates that you can specify up to 10 vsan-id1
[ to vsan-id2 ] parameters.
Examples
# Assign interface VFC1 to VSANs 1, 2, 10, and 20 through 100.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] port trunk vsan 1 to 2 10 20 to 100

vsan

Use vsan to create a VSAN and enter VSAN view. If the VSAN already exists, you directly enter VSAN
view.
Use undo vsan to delete a VSAN.
Syntax
vsan vsan-id
undo vsan vsan-id
Default
Only the default VSAN (VSAN 1) exists.
Views
System view
Predefined user roles
network-admin
Parameters
vsan vsan-id: Specifies a VSAN by its ID in the range of 1 to 3839.
Usage guidelines
You cannot create or delete VSAN 1, because it is the system-default VSAN. You can create VSANs 2 to
3839.
On a device, you can create up to 16 VSANs, including the default VSAN.
Examples
# Create VSAN 10 and enter its view.
<Sysname> system-view
[Sysname] vsan 10
[Sysname-vsan10]
38