Configuring Meps - HP 6125G Configuration Manual

Service instance without the MD name, which takes effect in only CFD IEEE 802.1ag.
•
You can create either type of service instance as needed.
Creating a service instance with the MD name
To create a service instance with the MD name, create the MD and MA for the service instance first.
To configure a service instance with the MD name:
Step
1. Enter system view.
Create an MD.
2.
3. Create an MA.
4. Create a service instance with
the MD name
Creating a service instance without the MD name
When you create a service instance without the MD name, the system automatically creates the MA and
MD for the service instance.
To create a service instance without the MD name:
Step
1. Enter system view.
2. Create
without the MD name.

Configuring MEPs

CFD is implemented through various operations on MEPs. A MEP is configured on a service instance, so
the MD level and VLAN attribute of the service instance become the attribute of the MEP.
Before creating MEPs, configure the MEP list. A MEP list is a collection of local configurable MEPs in an
MA and the remote MEPs to be monitored.
To configure a MEP:
Step
1. Enter system view.
2. Configure a MEP list.
3. Enter Layer 2 Ethernet interface
view.
Command
system-view
cfd md md-name level level-value
cfd ma ma-name md md-name vlan
vlan-id
cfd service-instance instance-id md
md-name ma ma-name
Command
system-view
cfd service-instance instance-id maid
a service instance
format { icc-based ma-name | string
ma-name } level level-value vlan vlan-id
Command
system-view
cfd meplist mep-list
service-instance instance-id
interface interface-type
interface-number
20
Remarks
N/A
By default, no MD is created.
By default, no MA is created.
By default, no service instance with
the MD name is created.
Remarks
N/A
By default, no service
instance without the MD
name is created.
Remarks
N/A
By default, no MEP list is
configured.
To create a MEP, the MEP ID must
be included in the MEP list of the
service instance.
N/A