Vrrp Load Balancing Mode Configuration Example - HP 6125G Configuration Manual

High availability configuration guide
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
# Display the detailed information about the VRRP group on Switch B.
[SwitchB-Vlan-interface3] display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 2
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Become Master
Auth Type
Virtual IP
Master IP
Interface Vlan-interface3
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
The output shows that in VRRP group 1 Switch A is the master, Switch B is the backup and hosts
with the default gateway of 202.38.160.100/25 accesses the Internet through Switch A; in VRRP
group 2 Switch A is the backup, Switch B is the master and hosts with the default gateway of
202.38.160.200/25 accesses the Internet through Switch B.

VRRP load balancing mode configuration example

Network requirements
Switch A, Switch B, and Switch C belong to VRRP group 1 with the virtual IP address of 10.1.1.1/24.
Hosts on network segment 10.1.1.0/24 use 10.1.1.1/24 as their default gateway. Use the VRRP
group to make sure that when a gateway (Switch A, Switch B, or Switch C) fails, the hosts on the
LAN can access external networks through another gateway.
VRRP group 1 is operating in load balancing mode to make good use of network resources.
Configure a track entry on Switch A, Switch B, and Switch C to monitor their own VLAN-interface
3. When the interface on Switch A, Switch B, or Switch C fails, the weight of the corresponding
switch decreases so that another switch with a higher weight can take over.
: Up
State
: 100
Running Pri
: Yes
Delay Time
: 2200ms left
: None
: 202.38.160.200
: 202.38.160.131
: Standard
: Virtual MAC
: 1
Adver Timer
: Up
State
: 100
Running Pri
: Yes
Delay Time
: 2200ms left
: None
: 202.38.160.100
: 202.38.160.1
: 2
Adver Timer
: Up
State
: 110
Running Pri
: Yes
Delay Time
: None
: 202.38.160.200
: 0000-5e00-0102
: 202.38.160.131
144
: Backup
: 100
: 0
: 1
: Backup
: 100
: 0
: 1
: Master
: 110
: 0

Advertisement

Table of Contents
loading

This manual is also suitable for:

6125 blade switch series

Table of Contents