HP 6125G Configuration Manual page 202

Become Master
Auth Type
Virtual IP
Master IP
VRRP Track Information:
Track Object
# Display information about track entry 1 on Switch B.
<SwitchB> display track 1
Track ID: 1
Status: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
BFD session:
Packet type: Echo
Interface : Vlan-interface2
Remote IP : 192.168.0.101
Local IP : 192.168.0.102
The output shows that when the status of the track entry becomes Positive, Switch A is the master,
and Switch B the backup.
# Enable VRRP state debugging and BFD event debugging on Switch B.
<SwitchB> terminal debugging
<SwitchB> terminal monitor
<SwitchB> debugging vrrp state
<SwitchB> debugging bfd event
# When Switch A fails, the following output is displayed on Switch B.
*Dec 17 14:44:34:142 2008 SwitchB BFD/7/EVENT:Send sess-down Msg,
[Src:192.168.0.102,Dst:192.168.0.101,Vlan-interface2,Echo], instance:0,
protocol:Track
*Dec 17 14:44:34:144 2008 SwitchB VRRP/7/DebugState: IPv4 Vlan-interface2 | Virtual
Router 1 : Backup --> Master
# Display the detailed information about the VRRP group on Switch B.
<SwitchB> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
: 2200ms left
: None
: 192.168.0.10
: 192.168.0.101
: 1 State : Positive
reason: The status of the tracked object changed
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
: Yes Delay Time
: None
: 192.168.0.10
: 0000-5e00-0101
: 192.168.0.102
: 1 State : Negative
195
Switchover
: 1
: Master
: 100
: 0
Switchover