Syntax:
ProCurve (config)# show port-access authenticator clients
Port Access Authenticator Client Status
Port
Client Name
----- ------------ -------------
1
webuser1
1
webuser2
1
webuser3
3
webuser4
Figure 12-16. Example of show port-access authenticator clients Command Output
Configuring Port-Based and User-Based Access Control (802.1X)
Displaying 802.1X Configuration, Statistics, and Counters
show port-access authenticator clients [port-list]
Displays the session status, name, and address for each
802.1X port-access-authenticated client on the switch.
Multiple authenticated clients may be displayed for the same
port. The IP address displayed is taken from the DHCP
binding table (learned through the DHCP Snooping feature).
If DHCP snooping is not enabled on the switch, n/a (not
•
available) is displayed for a client's IP address.
•
If an 802.1X-authenticated client uses an IPv6 address,
n/a - IPv6 is displayed.
•
If DHCP snooping is enabled but no MAC-to-IP address
binding for a client is found in the DHCP binding table,
n/a - no info is displayed.
MAC Address
IP Address
--------------- --------------
001321-eb8063
192.192.192.192 Authenticated
001560-b3ea48
n/a - no info
000000-111111
n/a - IPv6
000000-111112
n/a
Session Status
Authenticating
Authenticating
Authenticating
12-61