HP ProCurve 6120G/XG Manual page 114

Web and MAC Authentication
Configuring Web Authentication
Syntax:
ProCurve (config)# show port-access web-based clients 1 detailed
Port Access Web-Based Client Status Detailed
Client Base Details :
Port
Session Status : authenticated
Username
IP
Access Policy Details :
COS Map
Untagged VLAN
Tagged VLANs
RADIUS-ACL List :
deny in udp from any to 10.2.8.233 CNT
Hit Count: 0
permit in udp from any to 10.2.8.233 CNT
Hit Count: 0
deny in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 10.2.8.233 CNT
Hit Count: 0
permit in tcp from any to 0.0.0.0/0 CNT
Hit Count: 0
Figure 3-10. Example of show port-access web-based clients detailed Command Output
3-30
show port-access web-based clients <port-list> detailed
Displays detailed information on the status of web-
authenticated client sessions on specified switch ports.
: 1
: webuser1
: n/a
: 11111111
: 4006
: 1, 3, 5, 6, 334, 2566
Session Time(sec) : 6
MAC Address
: 98
In Limit %
Out Limit % : 100
: 0010b5-891a9e